Skip to content

Combination smoke + CO alarm

Kidde 10-Year Battery Smoke and Carbon Monoxide Alarm (30CUD10-V)

One sealed-battery unit that detects smoke and carbon monoxide and says which one it found, for the spots where one device has to do both jobs.

We earn a commission if you buy through links on this page, at no extra cost to you. It does not change what we recommend. See our affiliate disclosure. As an Amazon Associate I earn from qualifying purchases.

Best for

Hallways outside bedrooms, where a smoke alarm and a CO alarm are both needed

Specifications

SensorsPhotoelectric smoke + electrochemical CO
PowerSealed 10-year battery (not replaceable)
Alerts85 dB horn with voice alerts that name the hazard
StandardsCertified to UL 217 (10th ed.) and UL 2034 (5th ed.), Intertek/ETL
Warranty10-year limited

Specifications as published by Kidde. Confirm against the current spec sheet before buying: manufacturers revise models without renaming them.

What's good

  • Works through an outage: no mains power needed
  • Voice alerts tell smoke from CO, which changes what you do next
  • One device where two would otherwise be needed

What's not

  • Photoelectric smoke sensing only: Kidde itself recommends having both sensor types in the home
  • No CO ppm display, unlike the COBD10
  • Kidde recommends testing it weekly

Our verdict

Put it where both alarms are required anyway, the hallway outside the bedrooms is the classic spot, and it covers both hazards through an outage without a wire. For the level a generator's exhaust would reach first, like rooms next to the garage or a basement, the COBD10's ppm readout is the better instrument.

Compare with the alternatives

See the full outage safety roundup →