Skip to content

How Many Amps Does a Pellet Stove Use?

Pellet Stove draws about 2.5 amps at 120 volts (300 watts running) and briefly spikes to around 6.7 amps at startup. At 2.5 A, a pellet stove fits comfortably on a standard 15 A or 20 A household circuit.

Voltage

Amps = watts ÷ volts. Enter the wattage from your appliance's nameplate or label for an exact figure.

Current draw: a pellet stove

2.5 A

At 120 V
300 W
Typical breaker
15 A

Breaker figure is guidance for a simple resistive load, sized at 125% for continuous running; confirm against the nameplate and a licensed electrician.

Pellet Stove amperage at 120 V and 240 V

Same 300 W load: the current halves when the voltage doubles. Pellet Stove is typically a 120 V appliance in US homes.

DrawWattsAmps at 120 VAmps at 240 V
Running300 W2.5 A1.3 A
Starting (surge)800 W6.7 A3.3 A

The startup surge lasts a fraction of a second; it matters for generator sizing and breaker trip curves, not for your electric bill.

Breaker and circuit for a pellet stove

At 2.5 A, a pellet stove fits comfortably on a standard 15 A or 20 A household circuit. For a dedicated circuit, guidance is a 15 A breaker with 14 AWG copper (75°C terminations), sized at 125% of the running current because it runs 3+ hours at a time (NEC 210.20).

Guidance only: actual circuit sizing depends on your unit's nameplate, wire run length, and local code. Confirm with a licensed electrician. See the wire & breaker size chart for the full NEC ampacity table.

Measure what a pellet stove actually draws

The figures above are typical ratings. A plug-in power meter between the outlet and the cord shows the real amps and watts with nothing opened up. A clamp meter reads one conductor at a time, so it is the tool for hardwired and 240 V circuits; clamped around a whole cord it reads close to zero.

We earn a commission if you buy through links on this page, at no extra cost to you. It does not change what we recommend. See our affiliate disclosure. As an Amazon Associate I earn from qualifying purchases.

Energy meter and monitor picks

Frequently asked questions

Pellet Stove typically draws about 2.5 amps at 120 volts, based on a typical rating of 300 watts (amps = watts ÷ volts). Because it has a motor or compressor, it briefly pulls around 6.7 amps at startup. Check the nameplate on your specific unit: ratings vary by model.

Ask AI about this

Open an AI assistant with a question grounded in this page.

Home electrical load calculatorWatts to amps converterWhat pellet stove costs to run

Amp draw of other appliances

Cite or link to this pageAPA · MLA · Chicago · HTML

Free to cite, quote and link. Copy a ready-made citation: the link back is all we ask.

APA

WattSimple. (2026, July 16). How Many Amps Does a Pellet Stove Use? https://wattsimple.com/how-many-amps/pellet-stove

MLA

"How Many Amps Does a Pellet Stove Use?" WattSimple, 16 July 2026, https://wattsimple.com/how-many-amps/pellet-stove.

Chicago

WattSimple. "How Many Amps Does a Pellet Stove Use?" Last modified July 16, 2026. https://wattsimple.com/how-many-amps/pellet-stove.

HTML link

<a href="https://wattsimple.com/how-many-amps/pellet-stove">How Many Amps Does a Pellet Stove Use?</a> (WattSimple)