How Many Amps Does an Electric Patio Heater Use?

Electric Patio Heater amperage at 120 V and 240 V

Same 1,500 W load: the current halves when the voltage doubles. Electric Patio Heater is typically a 120 V appliance in US homes.

Breaker and circuit for an electric patio heater

At 13 A, an electric patio heater is too much for a shared 15 A circuit under the 80% rule; it belongs on a 20 A circuit, ideally with little else running on it. For a dedicated circuit, guidance is a 20 A breaker with 12 AWG copper (75°C terminations), sized at 125% of the running current because it runs 3+ hours at a time (NEC 210.20).

Guidance only: actual circuit sizing depends on your unit's nameplate, wire run length, and local code. Confirm with a licensed electrician. See the wire & breaker size chart for the full NEC ampacity table.

Measure what an electric patio heater actually draws

The figures above are typical ratings. A plug-in power meter between the outlet and the cord shows the real amps and watts with nothing opened up. A clamp meter reads one conductor at a time, so it is the tool for hardwired and 240 V circuits; clamped around a whole cord it reads close to zero.

We earn a commission if you buy through links on this page, at no extra cost to you. It does not change what we recommend. See our affiliate disclosure. As an Amazon Associate I earn from qualifying purchases.

Plug-in power meter

P3 International Kill A Watt P4400

Best for: Measuring what one plug-in appliance really uses

Check price at P3 International: P3 International Kill A Watt P4400 (opens in a new tab)

Clamp meter

Fluke 323

Best for: Measuring what a hardwired circuit actually draws, even in a crowded panel

Check price on Amazon: Fluke 323 (opens in a new tab)(paid link)

Frequently asked questions

Amp draw of other appliances

• Pool Pump4.6 A
• Hot Tub17 A
• Level 2 EV Charger40 A
• Garage Door Opener4.6 A