How Many Amps Does a CPAP Machine Use?

CPAP Machine amperage at 120 V and 240 V

Same 40 W load: the current halves when the voltage doubles. CPAP Machine is typically a 120 V appliance in US homes.

Breaker and circuit for a CPAP machine

At 0.33 A, a CPAP machine fits comfortably on a standard 15 A or 20 A household circuit. For a dedicated circuit, guidance is a 15 A breaker with 14 AWG copper (75°C terminations), sized at 125% of the running current because it runs 3+ hours at a time (NEC 210.20).

Guidance only: actual circuit sizing depends on your unit's nameplate, wire run length, and local code. Confirm with a licensed electrician. See the wire & breaker size chart for the full NEC ampacity table.

Measure what a CPAP machine actually draws

The figures above are typical ratings. A plug-in power meter between the outlet and the cord shows the real amps and watts with nothing opened up. A clamp meter reads one conductor at a time, so it is the tool for hardwired and 240 V circuits; clamped around a whole cord it reads close to zero.

We earn a commission if you buy through links on this page, at no extra cost to you. It does not change what we recommend. See our affiliate disclosure. As an Amazon Associate I earn from qualifying purchases.

Plug-in power meter

P3 International Kill A Watt P4400

Best for: Measuring what one plug-in appliance really uses

Check price at P3 International: P3 International Kill A Watt P4400 (opens in a new tab)

Clamp meter

Fluke 323

Best for: Measuring what a hardwired circuit actually draws, even in a crowded panel

Check price on Amazon: Fluke 323 (opens in a new tab)(paid link)

Frequently asked questions

Amp draw of other appliances

• Electric Blanket1.3 A
• Heated Mattress Pad0.83 A
• Waterbed Heater2.5 A
• Oxygen Concentrator2.5 A